Categories

PrestaShop

Newsletter

Logic Probe & Logic Pulser Maximize

Logic Probe & Logic Pulser

GLP-1A Logic Probe & Pulser

The GLP-1A logic pulser can be used to perform in-circuit testing of TTL, CMOS, and many other logic devices at a maximum of 50MHz. The GLP-1A is enhanced with a logic probe function with a minimum detectable pulse width of 10 ns, providing enough sensitivity for most applications. 

More details

GLP-1A

2 Items in stock

Warning: Last items in stock!

2 980,00 ₨

 

Features

※ Combining a Logic Probe and Pulser Combined into One 
※ Probe for Troubleshooting Digital Circuits 
※ Operating Voltage: 4VDC ~ 18VDC
※ Maximum Input Signal Frequency: 50MHz 
※ TTL: Logic “1”>3.0V±0.25V, Logic”0”<0.75±0.25V 
※ CMOS: Logic “1”>60%VCC±5%, Logic”0”<15%VCC±5% 
※ Minimum Detectable Pulse Width: 10nsec 
※ Pulser: Sync input impedance 120kΩ 
※ Pulse Repetition Rate: Switchable 0.5/400Hz 
※ Pulse width: 10μsec 
※ Dimensions & Weight: 18(W)x210(H)x18(D)mm, Approx. 50g

 

LOGIC PROBE
Maximum Input Frequency 50MHz
Input Impedance 120kΩ
Operating Voltage 4V DC (minimum)
18V DC (maximum)
TTL Logic "1" (HI LED) >3.0V +0.25V
  Logic "0" (LO LED) <0.75V +0.25V
CMOS Logic "1" (HI LED) >60%Vcc +5%
  Logic "0" (LO LED) <15%Vcc +5%, <40% +5% (For 7 ~ 18Vcc)
LOGIC PULSER
Sync Input Impedance 1MΩ
Pulse Rate 0.5/400pps
Pulse Width 10μS
Output Current 100mA sink/source
Square Wave Output 5mA sink/source
Operation Voltage 5 ~ 15V DC
Output Protection 20V DC (maximum 30 sec)
Input Protection 120V DC (maximum 30 sec)
Measurement Point Protection 35V DC (maximum 30 sec)
DIMENSIONS & WEIGHT
  18(W) x 210(H) x 18(L) mm
Approx. 50 g