Categories

PrestaShop

Newsletter

Nexys™4 Artix-7 FPGA Board Maximize

Nexys™4 Artix-7 FPGA Board

The Artix-7 FPGA is optimized for high performance logic, and offers more capacity, higher performance, and more resources than earlier designs. Artix-7 100T features include:

More details

410-274P-KIT

0,00 ₨

The Nexys4 board is a complete, ready-to-use digital circuit development platform based on the latest Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. With its large, high-capacity FPGA (Xilinx part number XC7A100T-1CSG324C), generous external memories, and collection of USB, Ethernet, and other ports, the Nexys4 can host designs ranging from introductory combinational circuits to powerful embedded processors. Several built-in peripherals, including an accelerometer, temperature sensor, MEMs digital microphone, speaker amplifier and lots of I/O devices allow the Nexys4 to be used for a wide range of designs without needing any other components. 

The Artix-7 FPGA is optimized for high performance logic, and offers more capacity, higher performance, and more resources than earlier designs. Artix-7 100T features include:
  • 15,850 logic slices, each with four 6-input LUTs and 8 flip-flops
  • 4,860 Kbits of fast block RAM
  • Six clock management tiles, each with phase-locked loop (PLL)
  • 240 DSP slices
  • Internal clock speeds exceeding 450MHz
  • On-chip analog-to-digital converter (XADC)
The Nexys4 also offers an improved collection of ports and peripherals, including:
  • 16 user switches
  • USB-UART Bridge
  • 12-bit VGA output
  • 3-axis accelerometer
  • 16Mbyte CellularRAM
  • Pmod for XADC signals
  • 16 user LEDs
  • Two tri-color LEDs
  • PWM audio output
  • Temperature sensor
  • Serial Flash
  • Digilent USB-JTAG port for FPGA programming and communication
  • Two 4-digit 7-segment displays
  • Micro SD card connector
  • PDM microphone
  • 10/100 Ethernet PHY
  • Four Pmod ports
  • USB HID Host for mice, keyboards and memory sticks

The Nexys4 is compatible with Xilinx’s new high-performance Vivado ® Design Suite as well as the ISE toolset, which includes ChipScope and EDK. Xilinx offers free “Webpack” versions of these toolsets, so designs can be implemented for no additional cost. 

Note: The Nexys4’s onboard programming circuitry is not supported by the Hardware Server in Vivado 2013.2 and earlier. The FPGA must be programmed using iMPACT in these versions of Vivado. The Hardware Server in versions 2013.3 and newer fully support the Nexys4.